About Us | Products | Shop Now | Contact Us | Home
The Quick Whip QD Truck Rod or S Bolt on Truck Rod
 
     





 

 

 

The Quick Whip Quick Disconnect Truck Rod (pat pending) is made to hold the large 3' x 5' flags. It is a full 1/2" thick fiberglass rod. If you want to run the big flags on your truck, Rhino, Razor, Buggy or any vehicle, this is the product to use. It comes in a full 8' length and if you like it can be shortened to any length, we do not recommend that you shorten it less than 5' 6" if you are using a 3' x 5' flag, as the flag will rest on your vehicle when you are stopped.

The Quick Whip (pat pending) quick disconnect flag holder is 100% stainless steel for long life and good looks. It is designed so sand, dirt or water will not be retained.

The Quick Whip quick disconnect is designed to rotate so your flag does not get tangled when the wind is blowing.

The Quick Whip quick disconnect is easy to install, the base fits any 1/2" hole you have on your vehicle. If you do not have a 1/2" hole on your vehicle we sell "L" brackets that you can mount on your vehicle and then mount the Quick Whip to the "L" bracket. "L" Brackets available at the bottom of this page. When you pull the pin the flag and shaft come out and the base remains on the vehicle.


1 Quick Whip Quick Disconnect Truck Rod

Complete Quick Whip Quick Disconnect Truck Rod $49.99 Includes: All Stainless Quick Disconnect and a 1/2" thick 8' long Fiberglass Rod. Please select the color of your shaft before selecting "add to cart". When you go to check out there is a note section, please tell me the length you want the shaft to be, if you are buying a flag please let me know if you would like it mounted. Also please leave me a phone number to contact you if I have a question.

See shipping costs for over sized items.

Shaft Color

1 Quick Whip Complete NO FLAG


1 Standard bolt on Truck Rod

Complete Standard Bolt on Truck Rod $29.99 Includes: Bolt on base and a 1/2" thick 8' long Fiberglass Rod. Please select the color of your shaft before selecting "add to cart". When you go to check out there is a note section, please tell me the length you want the shaft to be, if you are buying a flag please let me know if you would like it mounted. Also please leave me a phone number to contact you if I have a question.

See shipping costs for over sized items.

Shaft Color

1 Standard bolt on Truck Rod NO FLAG


"L" Bracket with 1/2", 10mm or two 1/8" holes for mounting your Whip $9.95

This Aluminum Bracket can be mounted on your vehicle to put your Quick Whip or Bolt on Whip where you want it. One arm has a 1/2" hole and the other arm has a 1/2" hole, 10 mm hole or two 1/8" holes. You can use one bolt, two bolts or two self drilling screws to mount the bracket. Bolts or screws not included.

 
Size

L Bracket


 

Last updated 06/23/10

About Us | Products | Shop Now | Contact Us | Home
Copyright 2015, All Rights Reserved