About Us | Products | Shop Now | Contact Us | Home
Live Wire LED Lit Whip
 
     





 

The Live Wire Whip is made from a very durable, very flexible Lexan clear plastic with diode lights all the way up the inside of the shaft. The shaft is six feet tall and contains 205 diode lights (LED's). The entire shaft is a light and can be seen for at least 2 miles.

There is no better LED whip on the market. Live Wire Whips are made in America with the best electronics, redundant wiring, UV protected Lexan, long lasting nylon flag, and a stainless steel base.

It can be hooked up to any 12 volt source on your vehicle.

The Live Wire whip screws into any standard Buggy Whip screw in base fitting (not Included). If you do not have a base for a Buggy Whip I have two types one regular and one stainless steel that matches the base of the Live Wire Whip. You do not need a base screw in connector, as you can just bolt the Live Wire Whip through any 1/2" hole and wire it directly to a 12 volt source. The screw in connector just makes it easy to remove, as you just unscrew the Live Wire Whip from the connector when you want to remove it from your buggy. If you mount it directly by bolting it on you will need wrenches to remove it each time.

Live Wire Whips are available in several standard colors including all White in the front and all Red in the rear. Custom shaft light combinations are available for an extra charge, send me an e-mail and I will give you a quote for your special configuration. Your custom design can be made up of most colors and combinations. Please allow 3 weeks for custom designs. The Live Wire Whip is warranted for one full year from the date of purchase, this does not include breakage. If you break it or after 1 year, the Live Wire Whip can be repaired for a nominal fee.

iiiiiiiiii iiiii iiiii iiiii

iiiiiiiiI WhiteiiiiIIIIIIIIIIIIIIii BlueiiiiiiiiiiiiiiiiiiiiiPurpleiiiiiiiiiiiiRed, White & BlueiiiiiiiiRed

iiiiLive Wire Lighted Shaft Whips $139.99

Live Wire Whip

iiiiiLighted Whip Quick Disconnect Base Connector $14.95

This Base Connector goes through a 1/2" hole and bolts down. The Live Wire Whip is designed to screw into this type of base QD connector. It uses the body as the ground and has an isolated center wire to connect to your positive power source. This Quick Disconnect is made of steel and uses a tinned RCA center jack. (Don't have a 1/2" hole to put it through see below for bracket.)

iiiiiLighted Whip Quick Disconnect "Stainless Steel" $34.95

This Base Connector goes through a 1/2" hole and bolts down. The Live Wire Whip is designed to screw into this type of base connector. It uses the body as the ground and has an isolated center wire to connect to your positive power source. This Quick Disconnect is made of stainless steel and uses a nickel plated full circle RCA center jack. This QD is far better then the standard one, it is stronger and the materials are less likely to rust, it has more space around the RCA connector so there is less chance of a ground short. It is also designed to match the base of the Live Wire Whip. (Don't have a 1/2" hole to put it through see below for bracket.)

 

"L" Bracket with 1/2", 10mm or two 1/8" holes for mounting your Whip $9.95

This Aluminum Bracket can be mounted on your vehicle to put your Live Wire Lighted Shaft Whip where you want it. One arm has a 1/2" hole and the other arm has a 1/2" hole, 10 mm hole or two 1/8" holes. You can use one bolt, two bolts or two self drilling screws to mount the bracket. Bolts or screws not included.

 
"L" Brackets

Last updated 06/1/2014
About Us | Products | Shop Now | Contact Us | Home
Copyright 2015, All Rights Reserved